Specifications - Nikon SD-9 User Manual

Specifications

■
Major specifications in combination with the SB-900
Batteries
AA-type Alkaline-manganese × 4 1.9 sec.
En
AA-type Lithium × 4
AA-type oxyride × 4
AA-type Ni-MH (eneloop) × 4
AA-type Alkaline-manganese × 8 1.2 sec.
AA-type Lithium × 8
AA-type oxyride × 8
AA-type Ni-MH (eneloop) × 8
*1: Interval until SD-9's ready-light comes on when firing the Speedlight at full output once
every 30 seconds (120 seconds with lithium batteries).
*2: Times the SD-9's ready-light comes on within 30 seconds when firing the Speedlight at full
output once every 30 seconds (120 seconds with lithium batteries).
• Use the same type of batteries with both the SD-9 and the SB-900.
• With fresh batteries at normal temperatures (20 °C/68 °F). The performance may vary
depending on the battery's freshness or change of battery specifications.
• When the ready-lights are off (or the SD-9 is not connected to the SB-900), the SD-9 uses
very little battery power, reducing the need to change batteries frequently. Batteries should
be removed when the unit is put away in storage or not used for long periods.
Dimensions (W × H × D): Approx. 180.5 × 73 × 23.0 mm (7.1 × 2.9 × 0.9 in.)
Weight: Approx. 205 g (7.2 oz.) (without batteries)
• Specifications and design are subject to change without notice.
• Oxyride battery is a registered trademark of Matsushita Electric Industrial Co., Ltd.
• Other products and brand names are trademarks or registered trademarks
20
Min. recycling
time (approx.)
2.4 sec.
1.4 sec.
1.2 sec.
1.6 sec.
1.0 sec.
0.8 sec.
(Body only)
Min. number of fl ashes
*1
recycling time
280/1.9 – 30 sec.
500/2.4 – 120 sec.
280/1.4 – 30 sec.
350/1.2 – 30 sec.
450/1.2 – 30 sec.
840/1.6 – 120 sec.
450/1.0 – 30 sec.
520/0.8 – 30 sec.
*2
/
*1