Setup; Before Starting (Initial Settings); Home Menu - Samsung BD-C6900 User Manual

Setup

Before Starting (Initial Settings)

1.
Turn on your TV after connecting the product.
(When the product is connected to TV for the
first time, the product will turn on automatically
and display the Initial Settings screen.)
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
Svenska
2.
Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
3. Press the ENTER button to select Start.
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
4.
Press the ▲▼ buttons to select the desired
TV aspect ratio, then press the ENTER
button. (See page 31)
5. Press the ENTER button.
If you selected a Network Setting, go to
pages 37~39 for more information about the
Network settings. When done, go to Step 6.
6. Press the OK button.
The Home menu is displayed. For more
information about the Home menu, please
see page 29.

English
> Move " Select
Start
Previous " Select
a

Home Menu

•
Please activate Internet@TV service
to enjoy a variety of Internet Services.
No Disc Change Device
a
NOTE
▪
When the product is connected to a TV for the first
time, product will turn on automatically.
This is not malfunction.
▪
The Home menu will not appear if you do not
configure the initial settings except as noted below.
If you press the BLUE (D) button during the network
▪
setup, you can access the Home menu even if the
network setup is not completed yet.
▪
When you return to the Home menu, the full screen
mode is cancelled automatically.
▪
If you want to display the Initial Setting screen again
to make changes, press the STOP (
on the front panel of the product for more than 5
seconds with no disc inserted.
▪
Use the HDMI cable to connect the product to an
Anynet+(HDMI-CEC)-compliant Samsung TV.
If the TV uses a language supported by the product,
that language will be set to a preferred language
automatically.
For this to work, the Anynet+(HDMI-CEC) feature
should be set to On in both the TV and the product.
▪
If the product is left in the stop mode more than 5
minutes without being used, a screen saver appears
on your TV. If the product is left in the screen
saver mode for more than 25 minutes, the power
automatically turns off.
You Tube
internet radio
View Devices Enter
"
d
) button