Dns - ZyXEL Communications GS1920 Series User Manual

8.11 DNS

DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and
vice versa. Use the DNS screen to configure and view the default DNS servers on the Switch.
Figure 67 Basic Setting > DNS
The following table describes the labels in this screen.
Table 30 Basic Setting > DNS
LABEL
Static Domain Name Server
Preference
Server Address
Apply
Cancel
Domain Name Server Table
Index
Server Address
Source
Chapter 8 Basic Setting
DESCRIPTION
This is the priority of the DNS server address.
Enter a domain name server IPv6/IPv4 address in order to be able to use a domain
name instead of an IP address.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the nonvolatile memory when you are done
configuring.
Click Cancel to reset the fields to your previous configuration.
This field displays priority of the DNS server address.
This field displays the IP address of the DNS server.
This field displays whether the DNS server address is configured manually (Static) or
obtained automatically using DHCP/DHCPv6 (Dynamic).
GS1920 Series User's Guide
90