Basic Setting; Chapter 8 Basic Setting; Overview; What You Can Do - ZyXEL Communications GS1920 Series User Manual

8.1 Overview

This chapter describes how to configure the System Info, General Setup, Switch Setup, IP
Setup, Port Setup, PoE, Interface Setup and IPv6 screens.

8.1.1 What You Can Do

• Use the System Info screen
• Use the General Setup screen
the system name and time.
• Use the Switch Setup screen
timers and assign priorities to queues.
• Use the IP Setup screen
gateway device, and the management VLAN ID.
• Use the Port Setup screen
• Use the PoE Status screens
PDs are receiving from the Switch and set the priority levels for the Switch in distributing power
to PDs. This screen is available for PoE model(s) only.
• Use the Interface Setup screens
and interface ID settings.
• Use the IPv6 screens
• Use the DNS screen

8.2 System Information

In the navigation panel, click Basic Setting > System Info to display the screen as shown. Use
this screen to view general system information. You can check the firmware version number.
C
(Section 8.2 on page
(Section 8.3 on page
(Section 8.5 on page
(Section 8.6 on page
(Section 8.7 on page
(Section 8.8 on page
(Section 8.9 on page
(Section 8.10 on page 78) to view IPv6 status and IPv6 configuration.
(Section 8.11 on page 90) to configure the default domain name server.
GS1920 Series User's Guide
62
H A PT ER

Basic Setting

62) to check the firmware version number.
64) to configure general settings such as
67) to choose your VLAN type, set the GARP
68) to configure the Switch IP address, default
70) to configure Switch port settings.
72) to view the current amount of power that
77) to configure Switch interface type
8