Active Products XE03 Owner's Manual page 19

TROUBLESHOOTING
Motor buzzes but fails to run.
No Water
Cause
Supply voltage
below minimum.
System has residual pressure.
Voltage loss due to
extension cord.
Pressure washer not used
for long periods.
Residual friction among
components. Unit might
hum.
Quick connect assembly is
attached in reverse.
Water supply is OFF .
Verify that only the pres-
sure washer is running on
this circuit.
trigger on spray wand to
Unplug any extension cords
attached and plug the unit
directly into the outlet.
Call the Toll-Free Hotline.
Disconnect water supply
and power ON for 2 to 3
times or until the motor
starts.
Verify that Inlet adapter (G2)
is attached to machine's
water inlet and that the
quick connect coupler (G1)
is attached to garden hose.
Turn ON water supply.
Remove kink in garden
hose.