Dmx Mode - Luxibel LX200Z User Manual

Slave
1. Press <ENTER> until Program highlights and press <ENTER>.
2. Press <DOWN> until Play highlights and press <ENTER>.
3. Press <DOWN> until Slave Receive highlights and press <ENTER>.
4. Press <DOWN> to select a slave mode and press <ENTER>to confirm.
7.4

DMX Mode

This mode allows you to control the device by any universal DMX controller.

All DMX-controlled devices need a digital start address so that the correct device responds to the
signals. This digital start address is the channel number from which the device starts to listen to the
DMX controller. The same starting address can be used for a whole group of devices or an individual
address can be set for every device.

When all devices have the same address, all the units will listen to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will listen to a separate channel number.
Changing the settings of one channel will only affect the device in question.
Example

To use the 1-channel mode, set the start address of the first unit to 1 (CH1), the second to 2 (CH2),
the third to 3 (CH3), and so on. The highest start address is 512.

Use the table below to define the correct address. The table shows the settings for units 1 to 3. Apply
the same principle for the other units.
Channel mode
17 Start address
Channel
15 Start address
Channel
24 Start address
Channel
To set the device to work with a DMX controller:
1. Press <ENTER> until Program highlights and press <ENTER>.
2. Press <DOWN> until Play highlights and press <ENTER>.
3. Press <DOWN> until DMX Receive highlights and press <ENTER> to confirm.
4. Use <UP> and <DOWN> to set the DMX starting address (A001-A512) and press <ENTER>.
DMX Channel Values
channel mode
15 17 24
1 1 1
2 2
2 3 3
4 4
3 5 5
6
4 6 7
V. 01 – 30/04/2013
First unit
1
1 ~ 17
1
1 ~ 15
1
1 ~ 24
name function
pan pan coarse
pan fine pan fine
tilt tilt coarse
tilt fine tilt fine
movement speed fastest to slowest
normal
movement function movement with backout
[no function]
normal shutter functions
shutter function pulse-effect forward
pulse-effect reverse
LX200Z
Start addresses
Second unit
18 (1 + 17)
18 ~ 34
16 (1 + 15)
16 ~ 30
25 (1 + 24)
25 ~ 48
8
Highest start
Third unit
35 (18 + 17)
35 ~ 51
31 (16 + 15)
31 ~ 45
49 (25 + 24)
49 ~ 72
min
dmx
0
0
0
0
0
0
16
32
0
16
32
©Velleman nv
address
496
498
489
max
dmx
255
255
255
255
255
15
31
255
15
31
47