Setting The Microphone Sensitivity; Master/Slave Mode - Luxibel LX200Z User Manual

Menu Submenu
Calibration
Fixture ID
Reload
Default
Program Play
Select Chase
Edit Chase
Edit Scenes
Scenes
Record
7.2 Stand-alone mode with built-in microphone
In stand-alone mode, the LEDs of the device will synchronize with the music through the built-in
microphone.
To set the device to stand-alone mode:
1. Press <ENTER> until Program is displayed and press <ENTER>.
2. Press <DOWN> until Music highlights and press <ENTER>.
3. Press <DOWN> to select Alone and press <ENTER> to confirm.
4. If necessary, set the microphone sensitivity:

Setting the microphone sensitivity

1. Press <ENTER> until Set highlights and press <ENTER>.
2. Press <DOWN> until UI Set highlights and press <ENTER>.
3. Press <DOWN> until Mic Sens. highlights and press <ENTER>.
4. Press <DOWN> to change the sensitivity and press <ENTER> to confirm
7.3

Master/slave Mode

The master/slave mode allows connecting several devices to a single master device. All slave devices will
then work synchronously with the master device.
You need to set one device to master mode and all other devices to slave mode.
Master
1. Connect all devices in series with DMX cables.
2. Press <ENTER> until Program highlights and press <ENTER>.
3. Press <DOWN> until Play highlights and press <ENTER>.
4. Press <DOWN> until Sequence highlights and press <ENTER>.
5. Press <DOWN> to select Master and press <ENTER>to confirm.
V. 01 – 30/04/2013
Edit User
-Password-
Pan...
Name
-Password-
PID Code
Basic Reload
Program Reload
---Password---
Private Reload
All Reload
DMX Receive
Slave Receive
Sequence
Music
Chase Part 1
Chase Part 2
Chase Part 3
Chase 1
:
Chase 8
Edit Scene 001
~ Edit Scene 250
ScXX=>ScXX
LX200Z
Options
User
Max Channel = XX
PAN = CH01
=XXX
=XXX
ON/OFF
ON/OFF
XXX
ON/OFF
ON/OFF
Slave Receive 1,2,3
Master / Alone
Master / Alone
Chase 1 ~ 8 Chase 1
Chase 1 ~ 8 Chase 2
Chase 1 ~ 8 Chase 3
Chase Test
Step 01 (=SCxxx)
Step 64 (=SCxxx)
Pan,Tilt,... (=XXX)
--Fade Time-- (=XXX)
--Scene Time-- (=XXX)
DMX Input
7
Function
User program mode
Edit users mode
Password: 050
Calibrate channel value
Name
Password: 050
Set PID of RDM
Basic reload
Program reload
Password: 050
Private reload
Reload all
Sets DMX mode
Choose slave position
Sets the run sequence
Sets music mode
Select and run auto program
Test
Sets beginning scene
Sets end scene
Input manual scene
Manually sets fading time
Manually sets scene time
Input scene from exterior
controler
Auto input scenes
©Velleman nv