Advertisement
DMX Mode
DMX addressing
The device is controlled by the universal DMX 512 protocol, the DMX address is the start
channel used to receive instructions from the external controller. For independent control,
each fixture must be assigned its unique address control channels. For example, this device
has three channel modes: 4/6/8. If we set the mode at standard 4 channels mode and there
are several models need to be independently controlled, we just simply address first fixture at
1, and second fixture at 5, third one at 10, etc.
If the devices have the same address, they will behave synchronically.
Connection
Use DMX cable with 5-pin XLR-plugs to connect the controller with the fixture or one fixture
with another.
12
Advertisement
