Manual Setting Of All Route Points - Prestigio GeoVision 7790 Quick Start Manual

Quick Start Guide
Prestigio GPS

2.3 Manual setting of all route points

To plan a route, where the starting and the destination points
are determined manually, first mark a point on the map
where you plan to start and press "Cursor" [1] to proceed to
the "My route" screen. Tap on the information panel at the
GV7790 Navitel 9.2 QSG_Book.indb 5
Fig.5 Fig.6
Fig.7 Fig.8
Fig.9
bottom of the screen [2]. Press "Set start" in the "Properties"
screen [3]. The GPS-receiver must be switched off. The
point will be marked on the map as a starting point. Select
a destination point on the map: tap on the map to mark the
point, press "Cursor" [4] and then press "Go!" in the "My
route" screen [5]. The program will automatically plan a route
[6].
Fig.1
Fig.3
Fig.5
Fig.2
Fig.4
Fig.6
2014/11/3 12:21:53