Remove and Replace the Lamp Door and Lamp Module
The lamp door (4009073) is located on the bottom of the projector. It covers the lamp module (DP8000:
SP-LAMP-001, DP8000HB: SP-LAMP-008). When the lamp door is shut properly, it closes an interlock
switch, which allows the lamp to strike when the projector is powered up.
1
Place the projector upside down on the work surface.
2
Loosen the captive screw that fastens the lamp door to the bottom case, then lift the door off of
the projector.
DP8000/8000HB Service Manual
9