Honda 08E91-E22-100B Installation Instructions Manual page 8

22. Using two pairs of needle-nose pliers, bend the
antenna plate according to the illustration and
measurement shown.
ANTENNA
SCALE
PLATE
8 of 21
15 mm
(0.6 in.)
8 mm
(0.3 in.)
NEEDLE-NOSE PLIERS
23. Measure the antenna cable as shown. Attach the
three foam cushion tapes to the antenna cable in
the measurement shown.
ANTENNA
CABLE
24. Using isopropyl alcohol on a shop towel, clean the
area where the antenna will attach. Allow to dry
before proceeding.
ROOF LINER
6D01232T
PLATE
25. Remove the adhesive backing from the antenna,
insert the antenna plate under the roof liner, and
attach the antenna to the windshield aligning the
template.
26. Remove the template.
AII 38215 (0710)
ANTENNA
FOAM
CUSHION TAPE
30 mm
(1.2 in.)
30 mm
(1.2 in.)
Clean with
isopropyl alcohol.
ANTENNA
© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
360 mm
(14 in.)
6D01240T
TEMPLATE
ADHESIVE
BACKING
6D01250T