Disassemble Lamp Driver Module - Sanyo PDG-DSU30 Service Manual

Note: when you assemble the unit must do
actions as below:
1. Use the cable tie to pierce the first hole of
LVPS for binding the Interlock Switch and
Lamp Driver to LVPS cable
square)
.
2. Use clamp to fix the Lamp Driver to LVPS
(as orange square)
cable
2-18 Disassemble Lamp
Driver
1. Unscrew 1 screw (as red circle) to
disassemble the Lamp Driver Module.
(as blue
.
PDG-DSU30 Confidential 2-2