Connecting The Speakers - Samsung HT-D5500K User Manual

Connections
Installing the Speakers on the Tallboy Stand(Continue)
3. Insert the large screw (5x15, For connecting
Stand & Stand Base) clockwise into the hole
on the rear of the stand using a screwdriver.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert another large screw (5x15, For
connecting Speaker & Stand) clockwise into
the hole on the rear of the speaker using a
screwdriver.
6.
This is the appearance after the speaker is
installed. Follow this steps to install other
speaker.

Connecting The Speakers

1.
Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire into the
red terminal (+), and then release the tab.
3. Connect the speaker wire plugs to the back of the product by
matching the Colors of the speaker plugs to the speaker jacks.
In case of HT-D5500K
Front Speaker (L)
Center Speaker
Subwoofer
0
English
1
Stand Base
Stand
3
5
Surround Speaker (L)
SPEAKERS OUT
CENTER FRONT SURROUND
SUBWOOFER FRONT SURROUND
SPEAKER IMPEDANCE : 3
COMPONENT OUT COMPONENT OUT
SPEAKERS OUT
CENTER FRONT SURROUND
SUBWOOFER FRONT SURROUND
AUX IN VIDEO OUT VIDEO OUT SPEAKER IMPEDANCE : 3
2 2
4
Speaker
Stand
6 6
Black
Red
Front Speaker (R)
Surround Speaker (R)