Foot Pedal - Pfaff 3811-2/45 Instruction Manual

Potentiometer 0-15
for adjusting the fullness as
allocated to the numbered keys
Knee lever for fullness
By pressing the knee lever you achieve the following results:
on the -2/45: switching between the two fullness levels which
on the -11/43, -11/45, -13/45:
switching between the last value selected with a
numbered key and sewing without fullness.

Foot pedal

0 = Foot pedal resting position
+ = Foot pedal forwards
+1 = Presser foot down
+2 = Sewing
- = Foot pedal reverse
-1 = Presser foot up
-2 = Trim thread (optional)
Presserfußposition
6
are set with the keys
s
s , needle position
s
Key panel
and
s
= in accordance with the switch setting on
the motor control panel (see technical
literature from the motor manufacturer)
Quick digital motor control panel
(see technical literature from the
motor manufacturer)
Bi02-10
On/off switch
For switching the entire
work station on and off. The
version depends on the
motor.
Bi02-01