Check - Pfaff 3811-2/45 Instruction Manual

After unpacking the machine and before operating it for the first time, check that it has not
been
If any damage has occurred, inform the forwarding company and your Pfaff agent immediately.
Place the machine in the desired position on a horizontal surface.
Connect the compressed air hose (6 mm internal diameter) to coupling 1 (diag. 1).
Minimum pressure in system:
Working pressure:
Pressure regulation:
.1 The admissable working voltage (arrow in fig. 3) is indicated on the specification plate.
.2 Never operate the machine if the supply voltage and the working voltage are not the
same! (circuit diagram!)
.3 Only plug the machine into an earthed power socket.
.1 Open the air pressure at the main conductor.
.2 Check the working pressure: 6 bar (Manometer 3; fig. 1)
.3 Adjust if necessary (adjustment knob 2).
.4 Switch on the machine (switch 4 to "|"; fig. 2)
Note: Other switch combinations are possible.
E.g. Switch on the machine = Press the "|" key.
Switch 4 to "O" (fig. 2).
Note: Other switch combinations are possible.
E.g. Switch on the machine = Press the "0" key.
8
damaged during transport.
7 bar
6 bar
adjusting knob 2