Pfaff 3811-2/45 Instruction Manual page 7

Tape brake on/off (optional)
This key is also on the -11/43, -11/45 and -13/45
even when there is no tape brake installed.
In this case it has no function whatsoever.
The tape brake can be installed at a later date.
on/off
(only on -13/45)
This key is also on the other sub-classes but
it is without function.
The edge trimmer cannot be installed later.
for switching from a numbered key to the full-ness
level of the next highest numbered key.
Example: the key is activated (LED on)
the key is pressed
- Machine switches to the fullness level
of key
for switching from a numbered key to the full-
ness level of the next lowest numbered key.
Example: the key is activated (LED on)
the key is pressed
- Machine switches to the fullness level
of key
for setting 2 fullness levels which can be
switched to and from with the knee lever.
(only -2/45)
Example: if you wish to switch between key
and key .
l
Press the
- The fullness level of the
now programmed as the upper
gathering level.
l
Press the
- The fullness level of the
now programmed as the lower
gathering level.
key, press the key
key is
key, press the key
key is
Sewing without fullness
By pressing the
"sewing without fullness".
The key is activated automatically when
the machine is switched on.
(except on -2/45)
Basic stitch length: 4 mm
By pressing one of the keys
basic stitch length of 4 mm.
With keys to , the fullness levels set with the
potis "1" to "9" can be called up.
Numbered keys for fullness levels
Basic stitch length: 3 mm
By pressing one of the keys
basic stitch length of 4 mm.
With keys to , the fullness levels set with the
potis "10" to "15" can be called up.
Bi02-02.CDR
Bi02-03.CDR
key you switch to
to you switch to the
to you switch to the
7