48" Model - Insignia NS-24ER310NA17 User Manual

48" model

Note
If your TV is the 24" or 32" model, go to
On your TV
AV cable Audio cable
connector connectors
AV jack Analog
audio jacks
1 Make sure that your TV's power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the VIDEO jack and AUDIO L and R jacks on the back of your TV and to the AV
and audio out jacks on the cable or satellite box.
Note
When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 On the Home screen, press
25
24" or 32" model
Cable or
satellite box
Cable
wall jack
or to highlight the AV tile, then press OK.
www.insigniaproducts.com
24"/32" 720P, 48" 1080P, 60Hz, LED Roku TV
on page 24.
AV cable
Back of TV