Table of Contents
Advertisement
,
make
sure
the
orifice
spuds are
wzewed into the gas inlet
~ch
to
hold the inlet tube
hex to prevent it mm twisting.
6. Put old orifm spuds back in the bag to save
for posd%lefuture@reversion.
N-:
U an OIifiC@ s pud
is accidentally
dropped,the cooktOp
clips
bkide screwdm "– er.
DO NCYI' attemptto raise the cooktop without
removing all 4 burnerbases.
If
wires
were discorPnected
to
remove
the
the
cooktop.
burnerelectrode
sure not to bend the
over the clips.
owa
Bumu'
1. Remove oven door,storage draweror broiler
drawer,oven bottom and burner baffle (on some
models). l%e lower burner ofice spud is
located behind the storage drawer,broiler
draweror kick panel. (On some models, a metal
shield must be removed to access the orifice.)
2oToc0mmrtti
W@M,
use a 1/2" wrench to
turn the lower burner
orifice spud clockwise.
Tiihten the spud only
until it is snug. To
prevent damage, do not
ove~hten
the
spud.
-
Tocanmrt
tonatural
@m,
loosen the spud about2 turns.
~
h
(on some models)
To convert to LP ~,
use a 1/2" wrench to
turn the upper burner orilice spud cloclwvise.
Tighten spud only until it is snug with the base.
To prevent damage, do not overtighten spud.
To convert to natural
gas, loosen the spud
about 2 turns.
46
Advertisement
Table of Contents
