Applications; Prior To Operation - Hitachi DH 24VB Instruction Manual And Safety Instructions

9. Dust cup, Dust collector (B)
Dust cup
Code No. 971787
10. Hammer grease A
1.1 lbs (500 g) (in a can) Code No. 980927
0.15 lbs (70 g) (in a green tube) Code No. 308471
0.07 lbs (30 g) (in a green tube) Code No. 981840
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

APPLICATIONS

Rotation and striking function
s Drilling anchor holes
s Drilling holes in concrete
s Drilling holes in tile
Rotation only function
s Drilling in steel or wood (with optional accessories)
s Tightening machine screws, wood screws.

PRIOR TO OPERATION

1. Power source
Ensure that the power source to be utilized conforms to the power source re-
quirements specified on the product nameplate.
2. Power switch
Ensure that the switch is in the OFF position. If the plug is connected to a recep-
tacle while the switch is in the ON position, the power tool will start operating
immediately and can cause serious injury.
3. Extension cord
When the work area is far away from the power source, use an extension cord of
sufficient thickness and rated capacity (refer to page 9). The extension cord should
be kept as short as practicable.
WARNING:
Dust collector (B)
Code No. 306885
Damaged cord must be replaced or repaired.
17