Accessories; Standard Accessories; Optional Accessories - Hitachi DH 24VB Instruction Manual And Safety Instructions

ACCESSORIES

WARNING:

STANDARD ACCESSORIES

(1)Case (Modeled plastic) (Code No. 307786) ............................................................. 1
(2)Side Handle (Code No. 303659) ............................................................................... 1
(3)Depth Gauge (Code No. 303709) ............................................................................. 1

OPTIONAL ACCESSORIES ..................

1. Drilling anchor holes (Rotation + Striking)
s Drill Bit (Slender shaft)
(1) Drill Bit (Slender
Shaft)
Outer diameter
1/8"
(3.4mm)
9/64"
(3.5mm)
s Drill Bit (Taper shank) and taper shank adaptor
(1) Drill Bit (Taper Shank)
12
Accessories for this power tool are mentioned in this Instruction
Manual.
The use of any other attachment or accessory can be dangerous
and could cause injury or mechanical damage.
(2) Adaptor for slender shaft
(SDS-plus Shank)
(1) Drill Bit (Slender Shaft)
Effective Length
1-25/32"
(45mm)
1-25/32"
(45mm)
(2) Taper Shank Adaptor
(SDS-plus Shank)
Cotter (Code No. 944477)
sold separately
Overall Length
3-35/64"
(90mm)
3-35/64"
(90mm)
(2) Adaptor for
Slender Shaft
Code No. Code No.
306369
306368
306370