Functional Description - SatKing PRO MAX User Manual

3-2. Functional description

HOME LED
Communication LED
NID check LED
TP search LED
Error message LED
HOME , MODE , SET , TUNE button
1. Get ready to use
i. When the all cable connections are completed, press POWER to turn the unit on.
ii. HOME LED will be solid this means the antenna is ready to go.
iii. Communication LED will be solid when the unit is turned on.
(This light means antenna unit is communicating with controller correctly.)
iv. If the antenna did not go back to the HOME position, the HOME LED will continue to flash while
antenna comes back to HOME. When the unit is ready, the default satellite "VAST" or the last selected
satellite will show on LCD screen of the controller.
NOTE
HOME position is when the antenna completely folded down and facing forward.
v. GPS LED flashes while searching for the current location. When GPS position is confirmed the LED
will become solid.
vi. Waiting until both HOME & GPS LED's are solid is recommended as this will allow the PRO MAX to
find the selected satellite faster with more precise alignment accuracy.
vii. If the searching operation starts before GPS becomes solid the GPS LED will continue to flash even
when the satellite is already locked. In this case, the PRO MAX may readjust the skew once its current
location is confirmed.
SatKing PRO MAX User manual - 8
GPS LED
POWER , Arrows , OK button