Table of Contents
Advertisement
D. Fix the antenna main unit with 4 pcs of nuts using spanner
D-1
Parts required, spanner, four(4) nuts and four(4)
washers
D-3
Fit the supplied nuts to each of the four bolts
and tighten firmly with spanner
E. Cable holder installation 1
E-1
Place cable holder around 30CM from the rear centre of the antenna. Apply friction tape 5mm from
the outside of the holder
E-2
Drill a 20mm hole (or larger) in the centre of the
tape marking
D-2
Place the antenna on the aluminium plate and
place the washers over each bolt
D-4
Make sure you check and four (4) nuts are
tightened
E-3
Make sure that hole size is big enough to insert
all cables together by one and one
SatKing PRO MAX User manual - 18
Hide quick links:
Advertisement
Table of Contents
