Sony RCP-750 Operation Manual page 54

Menu Configuration and Basic Menu Operations
Menu 2ndary menu
SD Adjusting SD Matrix
SD Multi Matrix
b)
CCU Config Menu Cont
Super Motion Flicker Reduction
d)
Field Rate
Frame Interpolation
Flicker Reduction
RCP Config RCP Adjusting
Rotary Encoder
Setting
b) This function becomes operable if enabled with g) (page 23(E)) or in Engineer mode only.
c) When connected to an HD system
d) When connected to an SD system
22(E)
Submenu Control item
Matrix 1 R-G/G-B/B-R
z
User Matrix
Preset Matrix
Matrix Off
Matrix 2 R-B/G-R/B-G
z
User Matrix
Preset Matrix
Matrix Off
Phase
z
Hue
z
Sat
z
Multi Matrix
Matrix Off
All Clear
Menu Disp On
Enter
Cancel
Select
z
c)
Flicker Reduction
[ x1, x3 ]
d)
[ OFF, A, B, C ]
d)
[ OFF, Normal, Strong ]
Buzzer Volume Call
z
Touch
z
Switch
z
Master
z
Call Buzzer
Touch Click
SW Click
All Off
LED Bright Switch
z
Tally
z
Other
z
Master
z
BLACK/FLARE Black
Flare
DETAIL Detail (HD)
SD Detail
Function
Set the matrix coefficients.
Turns the user matrix ON/OFF.
Turns the preset matrix ON/OFF.
Turns all the matrixes ON/OFF
Set the matrix coefficients.
Turns the user matrix ON/OFF.
Turns the preset matrix ON/OFF.
Turns all matrixes ON/OFF.
Select the multi matrix phase.
Adjust the multi marrâx hue.
Adjust the multi matrix saturation.
Turns the multi matrix ON/OFF.
Turns all the matrixes ON/OFF
Clears all the multi matrix settings.
Displays the CCU Menu.
Activates/deactivates "Enter."
Activates/deactivates "Cancel."
Selects the menu item.
Turns the flicker suppression of the HD Super-Motion
camera ON/OFF.
Sets the field rate when using a Super-Motion camera.
Sets the pattern to make the reference output picture in
3-times mode.
Sets the flicker suppression in 3-times mode.
Adjusts the volume of the call buzzer.
Adjusts the volume of the response sound of the touch panel.
Adjusts the volume of the confirmation sound of self-
illuminating switches.
Adjusts the total buzzer sound volume.
Turns the call buzzer ON/OFF.
Turns the response sound of the touch panel ON/OFF.
Turns the confirmation sound of switches ON/OFF.
Turns all the buzzers ON/OFF.
Adjust the brightness of the corresponding LEDs.
Adusts the master brightness of the LEDs.
Selects the black balance adjustment.
Selects the flare balance adjustment.
Selects the HD detail adjustment.
Selects the SD detail adjustment.