Advanced Settings; Static Routing - Sitecom DC-210 Full Manual

10 Advanced Settings

10.1 Static Routing

Static Routing allows you to configure the routing table of this router.
Parameters
Type
Destination LAN IP
Subnet Mask
Gateway
Click <Apply> at the bottom of the screen to save the above configurations. You
can now configure other advance sections or start using the router (with the advance
settings in place)
Description
Select NET or HOST. Set HOST if the
destination address is a single HOST.
If the destination address is a subnet, set
NET.
The network IP address of the destination
LAN.
The IP subnet mask of the destination LAN.
The IP address of the neighbor gateway in
the path toward the destination LAN.
25