Password - Sitecom DC-210 Full Manual

9.3 Password

You can change the password required to log into the broadband router's system
web-based management. Passwords can contain 3 to 12 alphanumeric characters,
and are case sensitive.
host in the Internet the ability to configure the Broadband router from a remote site.
Enter the designated host IP Address in the Host IP Address field.
Parameters
New Password
Re-type Password
Click <Apply> at the bottom of the screen to save the above configurations. You
can now configure other advance sections or start using the router (with the advance
settings in place)
The remote management function allows you to designate a
Description
Enter your new password
Enter your new password again for verification purposes
Note: If you forget your password, you'll have to reset
the router to the factory default with the reset button
(see router's back panel)
Click the Enable box to enable the Remote Management
function.
21