Lan Settings - Sitecom DC-210 Full Manual

9.4 LAN Settings

The LAN Settings allow you to specify a private IP address for your router's LAN
ports as well as a subnet mask for your LAN segment. You also can enable the DHCP
server to let the router manage private IP addresses for you automatically.
Parameters
IP address
Subnet Mask
DHCP Server
Default Description
192.168.0.1 This is the router's LAN port IP address
(Your LAN clients default gateway IP
address).
255.255.255.0 The Subnet Mask for your LAN segment is
fixed as 255.255.255.0
Enabled You can enable or disable the
DHCP server. By enabling the DHCP server
the router will automatically give your LAN
clients an IP address. If the DHCP is not
enabled then you'll have to manually set
your LAN client's IP addresses; make sure
the LAN Client is in the same subnet as
this broadband router if you want the
router to be your LAN client's default
gateway.
22