Mitsubishi Electric 151 Series Owner's Manual page 82

82
Appendices
Appendix E: Troubleshooting, continued
Reset Name
Channel
Memorization
Lock Menu
Pass Code
Control-Panel
Lock Release
Auto Input
Sensing for
HDMI
System Reset
TV Reset
IMPORTANT:
Use this reset
only if other
troubleshooting
has been unsuc-
cessful.
VUDU
™
Reset VUDU
Connection
(249 Series)
Downloaded From TV-Manual.com Manuals
When to Use How to Use
To erase and 1.
re-memorize channels
on the ANT input.
2.
3.
4.
5.
6.
To change your Lock See the cutout page from Appendix D,
menu pass code page 79.
To re-enable the Press and hold the ACTIVITY button
control-panel buttons on the control panel for ten seconds.
after activation of the If the TV is powered off, you can
Control-Panel Lock now press the POWER button to turn
it on.
If the New Device 1.
Found screen does 2.
not appear when you
3.
connect an HDMI
device.
If the TV does not turn Press and hold the POWER button on
on or off, does not the control panel for ten seconds.
respond to the remote
control or control-
panel buttons, or has
audio but no video.
To reset all consumer- 1.
accessible settings
and all memories to
the original factory 2.
defaults.
Use TV Reset if the TV
3.
can respond to con-
trols but TV behavior is
abnormal.
CAUTION: All owner-
performed setups and
adjustments will be
erased.
• VUDU does not 1.
respond to commands. 2.
• The selection does not
play (e.g., screen is
black or the "Loading"
messge is frozen on
screen).
While viewing the TV, press
MENU to display the main menu.
Navigate to the Initial> Channel
menu.
Press ENTER.
Highlight the reception mode,
e.g. Ant Air.
Highlight Scan.
Press ENTER to start channel
memorization.
Disconnect the HDMI device.
Delete the HDMI input in the
> Name menu (see page 50).
Power on and connect the new
device.
While viewing the TV, press
MENU to display the TV main
menu.
With the main menu displayed,
press number keys 1 2 3 to
display the Reset menu.
READ THE ON-SCREEN
WARNING AND INSTRUC-
TIONS.
• If you do not wish to use this
reset, press BACK or MENU to
back out.
• If you do wish to use the
reset, press ENTER to erase
all memories and settings.
Press the MORE Key.
Press the 2 key.
Resulting Action
All previously memorized chan-
nels for the antenna input are
erased and a new set of memo-
rized channels is created. To
add or delete individual chan-
nels, see Initial > Channel >
Edit menu instructions on page
48.
Allows establishment of a new
code.
Allows the control panel to be
unlocked if the remote control is
misplaced.
The New Device Found screen
Inputs
will display.
The TV will turn off. Power on the
TV and the green LED will flash
quickly for about one minute. The
changes you made most recently,
before using SYSTEM RESET, may
be lost.
The TV will start the initialization
process and then turn off.
Power on the TV and the front
green LED will start flashing. All
memory and settings outlined in
this Owner's Guide will need to
be set again.
The screen will briefly go blank
while VUDU initializes.
This reset does not reset the TV
or any TV settings.