Appendix E: Troubleshooting - Mitsubishi Electric 151 Series Owner's Manual

Appendix E: Troubleshooting

TV Reset Comparison Guide
You can resolve many common TV problems using the reset
functions described in the following table. See also the
troubleshooting suggestions later in this appendix.
IMPORTANT
Before you change sound or picture settings: If picture
or sound settings seem wrong for a broadcast channel
Reset Name
Format
PerfectColor ™
Reset
or
PerfectColor ™ /
PerfecTint ™
Reset (153 and
249 Series)
(for the single
input currently
being watched)
A/V Memory
Reset
(for the single
input currently
being watched)
A/V Reset
(for all inputs)
Service and Customer Support
Service
If you are unable to correct a problem with your TV,
consult your Mitsubishi dealer or Mitsubishi Consumer
Relations at (800) 332-2119.
• DO NOT adjust any controls other than those
described in this Owner's Guide.
• DO NOT remove the protective back cover of your
TV.
Downloaded From TV-Manual.com Manuals
When to Use
When the picture
shape seems
incorrect, use
MORE > 0 (FORMAT) to
change the shape of
the picture.
When the color
intensities seem out
of balance, use the
PerfectColor/PerfecTint
reset to reset the color
balances to the original
factory settings.
Both PerfectColor and
PerfecTint are reset at
the same time.
When audio and/
or video settings for
a single input seem
incorrect, use A/V
Memory Reset to return
the input to the original
factory settings.
To reset audio and
video adjustments for
all inputs to the original
factory settings.
(a channel from the ANT input, a cable box, or satellite
receiver), first check other channels from the same input
before changing settings. If most other channels from the
same input seem correct, there is likely a problem with the
broadcast rather than with the TV. Use care in this case, as
changes you make to fix problems on individual channels
also affect all other channels on the same input.
How to Use
Press the MORE key and then repeat-
edly press 0 (FORMAT) to cycle
through the available aspect ratios.
1. While viewing the input to
be reset, press MENU and
go to Adjust > Picture + >
PerfectColor.
2. Press ENTER to display the
PerfectColor adjustment screen.
3. Press CANCEL to reset the colors.
1. While viewing the input to reset,
press MENU and go to Adjust >
Reset.
2. Press ENTER to highlight the
Reset icon.
3. ENTER again to reset.
Press
While viewing the TV, press the
control-panel buttons ACTIVITY and
VOLUME DOWN at the same time for at
least two seconds.
Customer Support
• To order replacement or additional remote con-
trols or to purchase an IR emitter cable, visit
our website at www.mitsuparts.com or call
(800) 553-7278.
• For questions:
Call Consumer Relations at 800-332-2119.
E-mail: MDEAservice@mdea.com
Website: www.mitsubishi-tv.com
249 Series.
•
VUDU account, contact VUDU Customer Care at
www.VUDU.com/support.
Appendices
Resulting Action
The last-used format for a signal
type is memorized for each
input. The next time the same
input and the same signal type is
viewed, the last-used format will
be recalled.
All PerfectColor/PerfecTint
sliders are reset to the
original center position. The
PefectColor/PerfecTint settings
for other inputs remain
unchanged.
All Audio and Video settings
for the individual input are
reset except for the Listen To,
Language, audio Balance,
Closed Caption, and Advanced
Picture settings.
All Audio and Video settings are
returned to the original factory
settings, including Listen To,
Language, audio Balance,
Closed Captions, and Format.
If you are having difficulty with your
81