Inputs - Mitsubishi Electric 151 Series Owner's Manual

50
4. TV Menus

Inputs

Name
General Notes
When you change an input name in the Name menu and then exit the Name menu:
• The name is changed
• The icon in the
• Audio and video settings are changed to the defaults for the new device type.
• 153 and 249 Series:
Notes for HDMI devices
• Disconnecting an HDMI device:
you remove it. Select Delete in the Inputs > Name menu to remove an unwanted icon for an HDMI input.
• If the New Device Found screen does not display as expected when you connect an HDMI device, see the
reset instructions under "Reactivating Auto Sensing for an HDMI Input," page 13.
• HDMI Control and CEC-Enabled Devices:
If case of CEC conflicts:
•
- Turn off the TV's HDMI Control signals to the device (see below for
- Turn off each device's internal CEC capability.
See Appendix B for the TV's HDMI Control or, to turn on/off a specific device's response to CEC signals, see
the device owner's manual.
Learn
AVR
HDMI Control
Activity
Downloaded From TV-Manual.com Manuals
Cablebox, Cam(corder), CD, DVD
(DVD, DVD2, Blu-ray), DVR, Game
(Game, PS, Xbox, Wii), MP3 Player,
PC, Satellite, VCR, AVR
Delete (deactivated HDMI only)
On/Off (ANT only)
Activity menu is changed
All previous NetCommand IR "learning" for the input is erased.
When you disconnect an HDMI device, the icon remains in the Activity menu until
Turn off CEC signals in one of these ways:
153 and 249 Series
Sets up or changes NetCommand IR control of the current viewing device.
See "About NetCommand IR Control," page 55.
153 and 249 Series
Sets up or changes NetCommand IR control of an A/V receiver.
See "NetCommand IR Control of an A/V Receiver" on page 61.
On, Off
Select On or Off to enable or disable the TV's control of a CEC-enabled device.
See Appendix B for use of this feature.
• Lets you customize the Activity menu choices for the current input.
• Highlight the activity name and press
• See "How is the Activity Menu Generated?" on the opposite page.
• Lets you assign or
the Activity menu.
- Press to move between inputs.
- Press to select a name.
- You cannot change the name of the current input; you
must first switch to another input. If you have only one
input, such as a cable box, make sure the Ant input is
On and switch to Antenna in the Activity menu before
renaming the single input.
• Lets you turn the
ity menu).
• Lets you delete unused HDMI inputs from the
• A CEC-enabled tuner can be named either
Satellite.
• A CEC-enabled DVD player can be named
Blu-ray.
See Appendix B, "HDMI Control of CEC Devices," page 75.
ENTER to make changes.
change names of inputs appearing in
Ant input On/Off (to display/hide it in the Activ-
Cable Box or
DVD, DVD2, or
HDMI Control).
Activity menu.