Tv Connections; Before You Begin; Cable Management - Mitsubishi Electric 151 Series Owner's Manual

2
16

TV Connections

Before You Begin

Auto Input/Auto Output Sensing
The TV's Auto Sensing feature automatically recognizes
most connections and prompts you to identify the type
of device connected. See page 13 for more on Auto
Sensing.
Connection Types
Use the connection types available on your input
devices that will give the best video quality. For
example, choose HDMI over component video, and
choose component video over composite video.
Picture Quality
For best picture quality, route signals directly from the
input device to the TV whenever possible.

Cable Management

Install the cable tie
(supplied) in one of
the four mounting
holes on the back.
1
2
Downloaded From TV-Manual.com Manuals
Lock the cable tie in place
by pushing the end into
the mounting hole.
To remove the cable tie,
squeeze the side tabs and
pull out.
Surround Sound
For best surround sound audio quality, route audio or
HDMI cables from the source device directly to your TV
(for Sound Projector) or directly to your A/V receiver if
using an external sound system.
IMPORTANT
Accessory items such as cables, adapters,
splitters, or combiners required for TV
connections are not supplied with the TV.
These items are available at most electronics
stores.
Sample cable routing. Secure
the cable bundle with the
release tab facing out.
Press the release tab to
loosen the cable tie.