Introduction To Home-Theater Control - Mitsubishi Electric 151 Series Owner's Manual

Introduction to Home-Theater Control

This summary offers some examples of control methods available using the TV's remote control. You may wish to
use one or more of these methods in your home theater after completing Auto Input Sensing.
Source device connected directly to the TV
Remote Control Programming (Any Connection Type)
Program the remote control to operate the A/V device. To control the device, set
the remote control to the correct mode for the device type. See Appendix A, "Pro-
gramming the Remote Control." In the case of an A/V receiver, use the Audio Lock
feature, page 69.
CEC-Enabled HDMI Device (HDMI Connection Only)
See Appendix B, "HDMI Control of CEC Devices," page 75.
153 and 249 Series: NetCommand IR Control (Any Connection Type)
Set up NetCommand IR control of the device's keys as desired. See "IR Emitter
Placement," page 56, and "Initial NetCommand Setup," page 57.
Source device connected to an A/V receiver connected to the TV
CEC-Enabled HDMI A/V Receiver
The TV's remote control may operate some functions of a connected A/V device.
You can switch to the device by selecting its icon in the TV's Activity menu. See
Appendix B, "HDMI Control of CEC Devices," page 75.
153 and 249 Series: A/V Receiver with HDMI Output (no CEC)
1. Set up NetCommand IR control of the
Emitter Placement," page 56, and "Setting Up A/V Receiver Control," page 62.
2.
Set up NetCommand IR control of the
"NetCommand Control of a Device Connected to an HDMI A/V Receiver," page
66.
Downloaded From TV-Manual.com Manuals
3. Using TV Features
A/V receiver's keys as desired. See "IR
source device's keys as desired. See
Any Connection Type
A/V
TV
Device
HDMI
Cable
CEC-Enabled
TV
A/V Device
Any Connection Type
A/V
TV
Device
CEC-Enabled
Source Device
HDMI
Cable
A/V Receiver
HDMI
Cable
TV
Source
Any Con-
Device
nection Type
A/V Receiver
HDMI
Cable
TV
39