Setting Sms Centres; Sms On A Pabx - Gigaset A580 Instruction Manual

Deleting the incoming message list
All new and old SMS messages in the list are
deleted.
¤
Open the incoming message list.
¢
§Menu§
Delete List
Select and press
§OK§
Press the display key to confirm
the delete. The list is cleared.
Adding the number of the message
sender to the directory
¤
Open the incoming message list.
q
Select SMS.
¢
§Menu§
Copy to Directory
¤
Complete the entry
Replying to or forwarding SMS
messages
You are reading an SMS.
§Menu§
Press the display key.
You have the following options:
Reply
Write and send a reply SMS directly
¢
( page 31).
Use text
Edit the text of the SMS and then send it.
Send Text
Forward the text of an SMS to another
recipient.
Changing the character set
You are reading an SMS.
§Menu§
Press the display key.
Character Set
Text is shown in the selected character
set.

Setting SMS centres

Entering/changing SMS centres
¤
You should find out about the services
and special functions offered by your
§OK§
.
¢
page 25.
service provider before you make a new
application and before you delete pre-
configured phone numbers.
¢ ¢
§Menu§
SMS Settings
¢
Service Centres
q
Select an SMS centre (e.g.
centre #
1) and press
You have the following options:
Active Send Srvc. Cent.
If the SMS messages are to be sent
through this SMS centre, press
vate the SMS centre (‰ = on). If a different
SMS centre was active previously, then
this will be deactivated.
SMS centre #
Enter the number of the SMS centre and
§OK§
press .
Sending an SMS via another SMS
centre
¤
Activate the SMS centre (2 or 3) as the
active send service centre (
¤
Send the SMS.

SMS on a PABX

u
You can only receive an SMS when the
Calling Line Identification is forwarded
to the extension of the PABX (CLIP). The
CLIP evaluation of the phone number for
the SMS centre takes place in your
Gigaset.
u
If required, you must prefix the number
for the SMS centre with the access code
(depending on your PABX).
If in doubt, test your PABX, e.g. by send-
ing an SMS to your own number: once
with and once without the access code.
u
When you send SMS messages, your
sender number may be sent without your
extension number. In this case the recipi-
ent cannot reply to you directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base station.
SMS (text messages)
SMS
§OK§
.
§OK§
to acti-
¢
page 33).
33