Playing Back Messages - Gigaset C285 Manual

Record Select and press
recording.
You will hear the ready tone (short tone).
¤
Now record your announcement (must
be at least 3 seconds long).
¤
§OK§
Press to end the recording.
The recorded announcement will be played
back automatically. You can record the
announcement again by repeating these
steps.
Please note:
u
Recording ends automatically if the max-
imum recording time of 90 seconds is
reached.
u
If you cancel the recording, the prere-
corded announcement will be used.
u
The recording is canceled if the answer-
ing machine memory is full.
¤
If necessary, delete old messages and
repeat the recording.
Playing back announcements
¢
§Menu§
Answer Machine
¢
Line 1 / Line 2
¢
Answer & Rec. / Answer Only
Play Select and press
playback.
If a personal announcement has not been
recorded, the corresponding prerecorded
announcement is used.
Deleting personal announcements
¢
§Menu§
Answer Machine
¢
Line 1 / Line 2
¢
Answer & Rec. / Answer Only
Delete Select and press
the announcement. If no per-
sonal announcement exists, you
will hear an error tone.
After deleting the personal announcement,
the corresponding prerecorded announce-
ment will be used.
22
§OK§
to start
¢
Record OGM
§OK§
to start
¢
Record OGM
§OK§
to delete
Selecting an announcement mode
You can choose between Answer & Rec. and
Answer Only.
¢
§Menu§
Answer Machine
¢
Mode Line 1 / Line 2
Answer & Rec. / Answer Only
Select announcement mode
and press
The selected mode is saved even after the
answering machine is deactivated.
Note:
If the message memory is full when in Answer &
Rec. mode, the answering machine switches
É
automatically to Answer Only mode. The flash-
ing icon is displayed on the base station.
If there are no new messages on the answering
machine and no new missed calls in the Calls List,
¥
Memory Full! is displayed on the handsets.
Delete old messages.
The answering machine automatically switches
back to the mode set once deletion is complete,
or you can select another recording mode.

Playing back messages

Note:
The base station and the handset operate
differently when playing back messages.
The date and time of each message is logged
(provided this has been set, page 13) and
displayed during playback.
Playing back new messages
New messages that you have not yet lis-
tened to are indicated by a slowly flashing
LED on the respective Start/Stop key ø /
ù on the base station (see page 5).
§Play§
Press the display key to start
playback.
If you have new messages only for one line,
playback starts immediately.
If you have new messages for both lines:
¢
Answer
§OK§
.