2-4. Using other driving systems
Hill-start assist control
Hill-start assist control helps to prevent the vehicle from rolling backwards
when starting on an incline or slippery slope.
Hill-start assist control can be operated when
■
The shift lever is in a position other than P.
●
The parking brake is not applied.
●
The accelerator pedal is not depressed.
●
Hill-start assist control
■
While hill-start assist control is operating, the brakes remain automatically
●
applied after the driver releases the brake pedal. The stop lights and the high
mounted stoplight turn on.
Hill-start assist control operates for about 2 seconds after the brake pedal is
●
released.
If the slip indicator does not flash and the buzzer does not sound when the brake
●
pedal is further depressed, slightly reduce the pressure on the brake pedal (do
not allow the vehicle to roll backward) and then firmly depress it again. If the sys-
tem still does not operate, check if the operating conditions explained above
have been met.
276
To engage hill-start assist con-
trol, further depress the brake
pedal when the vehicle is
stopped completely.
A buzzer will sound once to
indicate the system is activated.
The slip indicator will also start
flashing.
I n f o r ma t i o n P r o v i d e d b y :