2-4. Using other driving systems
■
Canceling and resuming the constant speed control
Cruise control can be set when
■
The shift lever is in D or range 4 or higher of S has been selected.
●
Vehicle speed is above 25 mph (40 km/h).
●
Accelerating after setting the vehicle speed
■
The vehicle can be accelerated normally. After acceleration, the set speed
●
resumes.
Even without canceling the cruise control, the set speed can be increased by
●
first accelerating the vehicle to the desired speed and then pushing the lever
down to set the new speed.
Automatic cruise control cancelation
■
Cruise control will stop maintaining the vehicle speed in any of the following situa-
tions.
Actual vehicle speed falls more than approximately 10 mph (16 km/h) below the
●
preset vehicle speed.
At this time, the memorized set speed is not retained.
Actual vehicle speed is below approximately 25 mph (40 km/h).
●
VSC is activated.
●
234
Pulling the lever toward you
cancels the constant speed
control.
The speed setting is also can-
celed when the brakes are
applied.
Pushing the lever up resumes
the constant speed control.
Resuming is available when the
vehicle speed is more than
approximately 25 mph (40
km/h).
I n f o r ma t i o n P r o v i d e d b y :