Flash Intensity; Photo Style Selector; Flash Evc - Samsung HZ50W Instruction Manual

Shooting ( )
4. Press the OK button once again to change the location of the focus
frame and the focus frame will appear again.
Even if you turn off the power and turn on it again, the camera
maintains the [Selection AF] setting.
[Selection AF] is not available when you use the [Face Detection]
function.

Flash Intensity

You can control fl ash intensity. (You can set fl ash intensity within the
range of +/- 2EV in intervals of 1EV.)
[-2], [-1], [0], [+1], [+2]
The [Flash EVC] function is not available in the [Smart Auto],
[Beauty Shot], [Scene] and [Movie], [Night] modes.
If the subject is too close or the ISO sensitivity is too high, changing
the value to a negative value (-) may not have any effect.
If the fl ash intensity is out of the control range because the
exposure value is too high or low, the camera may not operate
properly.

Photo Style Selector

You can add various effects to an image
without using image editing software.
1. Select the desired Photo style by pressing the Left/Right button
2. Press the Shutter button to take an image.

Flash EVC

-2 -1 0 +1 +2
Back Move
Custom RGB
and press the OK button.
Style mode Icon
Normal No style effect is applied.
Soft Soft style is applied.
Vivid Vivid style is applied.
Forest Forest style is applied.
Retro Sepia style is applied.
Cool Cool style is applied.
Calm Calm style is applied.
Classic Black & white effect is applied.
Negative Negative effect is applied.
Defi ne an RGB tone to create your own photo
style.

Photo Style Selector

Back Move
Description
057