JVC LT-42DP8BG Instruction Manual page 115

Decoder(EXT-2)
Component Auto
Select
EXT Setting
HDMI Setting
HDMI Setting
HDMI CEC On
HDMI- 1
Size Auto
Audio Auto
HDMI- 2
Size Auto
PC Position
PC Position
Auto
Demonstration
Select "On" when connecting the Decoder to EXT-2 through the
VCR (On / Off)
Changes the TV input to "EXT-4" when a component signal is input
to EXT-4 (On / Off)
Not available when viewing PC
g
"Setting external terminals" (P. 21)
Size :
If picture size is not correct in 480p(525p), change this setting to 1
or 2. Normally set to "Auto".
Audio :
If there is no sound, change this setting to "Digital" or "Analogue".
Normally set to "Auto".
HDMI CEC :
If you use a HDMI CEC compatible device, set this setting to "On".
g
For more details "What is "HDMI CEC"?" (P. 41)
Adjust the position of the PC image
adjust
Starts the "100Hz Clear Motion Drive" demonstration (On / Off)
(P. 42)
Reset
(blue)
36