User Maintenance Instructions; Cord Storage; Preventative Maintenance; Operation - Minuteman M20130-00 Operation Service Parts Care

USER MAINTENANCE INSTRUCTIONS

All service and repair should be performed by a qualified electrician. No user serviceable compo-
nents are employed in this equipment. No lubrication of the motor is required.

CORD STORAGE

While not in use storage can be accomplished by winding cord around handle assy. Cord should be
completely unwound during operation.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, return to service center.
• Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp
edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Always unplug the machine when removing brush. This equipment should be stored indoors and
not exposed to rain.

PREVENTATIVE MAINTENANCE -

This machine employs a motor carbon brush wear indicator light located on the rear of the motor
cover. This will illuminate when the carbon brushes are worn to the point of needing replacement,
service should be done by a qualified electrician.

OPERATION

This equipment is equipped with a trigger safety interlock. Refer to diagram pictured below.
2-Speed Models Only
5