Epson U590P Information Manual page 12

CONFIDENTIAL
PRINT #1, "AAAAA"; CHR$(&HD);
PRINT #1, "
ESC J n
[Name]
[Format]
[Range]
ESC J n prints the data in the print buffer and feeds the paper n × vertical motion unit. This command
is used to temporarily feed a specific length without changing the line spacing set by other
commands. The maximum paper feed amount is 40 inches. The vertical motion unit set by GS P is
used. The default value of the vertical motion unit is 1/144 inch.
PRINT #1, CHR$(&H1D);"P";CHR$(150);CHR$(144);
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&H1B);"J";CHR$(72);
PRINT #1, "CCCCC"; CHR$(&HA);
PRINT #1, "DDDDD"; CHR$(&HA)
ESC K n
[Name]
[Format]
[Range]
ESC K n prints the data in the print buffer and feeds the paper n × vertical motion unit in the reverse
direction. This command is used to temporarily feed a specific length without changing the line
spacing set by other commands. In the reverse direction, the maximum paper feed amount is 40
inches. The vertical motion unit set by GS P is used. The default value of the vertical motion unit is
1/144 inch.
Rev. A
Program Example
BBBBB"; CHR$(&HA);
Print and feed paper
ASCII ESC
Hex 1B
Decimal 27
0 ≤ n ≤ 255
Program Example
Print and reverse feed
ASCII ESC
Hex 1B
Decimal 27
0 ≤ n ≤ 255
TM–U590/U590P Information Manual
AAAAA
AAAAABBBBB
J n
4A n
74 n
AAAAA
BBBBB
CCCCC
DDDDD
K n
4B n
75 n
Print Sample
←
BBBBB
Auto line feed enabled
←
Auto line feed disabled
Print Sample
ESC J used to print one line and advance
the paper by 72/144 inch
Command Descriptions 1-5