Installation; Installation Of The Taste Guard Filter - AEG S54000KMX0 User Manual

Hide thumbs Also See for S54000KMX0:
Table of Contents

Advertisement

Available languages

Available languages

8. INSTALLATION

WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
8.1 Positioning
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
8.2 Location
A

8.3 Installation of the Taste Guard Filter

B
Cli-
Ambient temperature
mate
class
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
The appliance should be installed well
away from sources of heat such as radia-
tors, boilers, direct sunlight etc. Ensure
that air can circulate freely around the
back of the cabinet. To ensure best per-
formance, if the appliance is positioned
below an overhanging wall unit, the min-
imum distance between the top of the
cabinet and the wall unit must be at least
100 mm . Ideally, however, the appliance
should not be positioned below over-
hanging wall units. Accurate levelling is
ensured by one or more adjustable feet
at the base of the cabinet.
WARNING!
It must be possible to disconnect
the appliance from the mains
power supply; the plug must
therefore be easily accessible af-
ter installation.
The Taste Guard Filter is an active car-
bon filter which absorbs bad odours
maintain the best flavour and aroma for
all foodstuffs without risk of odour cross
contamination.
On delivery the carbon filter is in a plas-
tic bag to preserve performance.
• Open the air lever flap.
• Take the filter out of the plastic bag.
ENGLISH
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

S54000kmw0S54000km

Table of Contents