Confi Guring Home City Settings - Casio 5418 Operation Manual

Selecting a Mode
• The illustration below shows which buttons you need to press to navigate between modes.
To return to the Timekeeping Mode from any other mode, hold down C for about two seconds.
•
Timekeeping Mode Timekeeping Mode
Dial hand Dial hand
Thermometer Mode Thermometer Mode
E-8
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Auto Return Features
• The watch will automatically return to the Timekeeping Mode if you do not perform any button operation
for a particular amount of time in each mode.
Mode Name
Alarm
Thermometer
Setting screen (digital setting fl ashing)
Initial Screens
• When you enter the Timekeeping, Alarm, or World Time Mode, the data you were viewing when you last
exited the mode appears fi rst.
Scrolling
The D and B buttons are used on the setting screen to scroll through data on the digital display. In
•
most cases, holding down these buttons during a scroll operation scrolls through the data at high
speed.
E-10
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting either standard time or
daylight saving time (DST).
To confi gure Home City settings
City code and city name City code and city name
1. In the Timekeeping Mode, hold down A until ADJ appears in the
upper display.
When you release A (after ADJ appears), SET will be fl ashing in
•
the lower display. This is the setting mode.
• The watch will exit the setting mode automatically if you do not
perform any operation for about two or three minutes.
2. Use D (East) and B (West) to scroll through the available city codes.
• Keep scrolling until the city code you want to select as your Home
City is shown in the upper display.
• For details about city codes, see the "City Code Table" at the back
DST indicator DST indicator
of this manual.
3. Press C.
• This will cause the DST indicator to appear in the lower display
and the DST setting of the currently selected Home City to appear
in the upper display.
4. Press D to toggle the DST setting between daylight saving time (ON)
and standard time (OFF).
• Note that you cannot switch between standard time and daylight
saving time (DST) while UTC is selected as your Home City.
E-12
Confi guring Current Time and Date Settings
You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.
Changing the digital Home City data should cause the analog time setting to change accordingly. If the
analog time does not indicate the digital time, check the home positions of the hands and make
adjustments if necessary (page E-17).
To change the current time and date settings
1. In the Timekeeping Mode, hold down A until ADJ appears in the
City code City code
upper display.
When you release A (after ADJ appears), SET will be fl ashing in
•
the lower display.
E-14
Operation Guide 5418
Approximate Elapsed Time
3 minutes
1 to 2 minutes
3 minutes
• The dial hand indicates the watch's current mode.
Stopwatch Mode Stopwatch Mode
Alarm Mode Alarm Mode
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
Each press of A in the Timekeeping Mode will change digital display contents as shown below.
•
Date Screen
Timekeeping
Mode
Day of week
Hour hand
Minute hand
Seconds
Second hand
Seconds
Month Day
5. After all of the settings are the way you want, press A to exit the setting screen.
• The DST indicator appears to indicate that daylight saving time is turned on.
Note
• After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate
the current time for other time zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
To change the daylight saving time (summer time) setting
1. In the Timekeeping Mode, hold down A until ADJ appears in the
upper display.
When you release A (after ADJ appears), SET will be fl ashing in
•
the lower display.
2. Press C.
• This will cause the DST indicator to appear in the lower display
and the DST setting of the currently selected Home City to appear
in the upper display.
3. Press D to toggle the DST setting between daylight saving time (ON) and standard time (OFF).
4. After all of the settings are the way you want, press A to exit the setting screen.
• The DST indicator appears to indicate that daylight saving time is turned on.
2. Press C to move the fl ashing in the sequence shown below to select the other settings.
City Code
DST 12/24-Hour
(page E-12)
(page E-13) Format
Illumination Duration Button Operation Tone
(page E-33) On/Off (page E-37)
• The following steps explain how to confi gure timekeeping settings only.
3. When the timekeeping setting you want to change is fl ashing, use D and/or B to change it as
described below.
Screen To do this:
Toggle between 12-hour (12H) and 24-hour (24H)
timekeeping.
Reset the seconds to 00
(If the current seconds count is between 30 and 59,
one is added to the minute count).
Change the hour or minutes
Change the year, month, or day
4. After all of the settings are the way you want, press A to exit the setting screen.
Countdown Timer Mode Countdown Timer Mode
World Time Mode World Time Mode
E-9
Time Screen
Seconds
PM indicator Hour : Minutes
E-11
E-13
Seconds Hour Minutes
Day Month
Year
Do this:
Press D.
Press D.
Use D (+) and B (–).
E-15