Advertisement
Wireless
-
5GHz It works in 5GHz frequency spectrum
-
High output power Transmit output power programmable for different country selections
-
High Data Rate High speed transmitting rate up to 54Mbps, supports large payload such as MEPG video
streaming
-
Multifunction application Access Point/Client Bridge/Client Router/WDS AP/WDS Bridge
-
Long range transmitting Transmit power control and distance control (ACK timeout)
-
Signal Strength Display LED indicators have the best transmit and receive signal for traffic
communication. And RF signal strength status shown LEDs of 3 colors, making network build-up easier
-
Public wireless solution An AP interface that is especially useful in public areas such as hotspots and
enterprise
-
QoS(WMM) Enhance performance and density
Networking
-
PPPoE Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when
failed or disconnected
-
VPN Pass Through
Security
-
802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES)
-
MAC address functions MAC address filter (AP mode)
-
802.1x IEEE802.1x Authenticator
-
Station isolation
Management
-
Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade
-
Reset & Backup Reset to factory default. User can export all setting into a file via WEB
-
MIB MIB I, MIB II(RFC1213)
-
SNMP V1, V2c
* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice.
Features
4/26/2010
Advertisement
