Advertisement
7. Installation
7.1 Assembly and Setup (without Mount Brackets)
1. Place the subwoofer in the preferred location, taking into account all wiring and aesthetic considerations.
2. If the surface is not level, use the surface leveling feet by turning them clockwise to lower, and counter-
clockwise to raise the subwoofer floor. Lift one side at a time while adjusting for ease.
3. Connect the (+) and (-) leads on the subwoofer to the line coming from the amplifier. If using a 70V
transformer, follow the wiring instructions in the 70V transformer.
7.2 Assembly and Setup (with Mount Brackets)
1. Remove surface levelers by unscrewing them counter-clockwise until they come loose.
2. Attach the brackets to the feet, using the included hardware. With the sub placed in the preferred location,
pre-drill a hole through each designated bracket hole location.
3. Connect the (+) and (-) leads on the subwoofer to the line coming from the amplifier. If using a 70V
transformer, follow the wiring instructions in the 70V transformer.
4. Drill subwoofer into place with the required hardware (not included) to complete the mounting process.
www.snapav.com Support: 866.838.5052
ES-LS-BSUB-12 Installation Manual
Pg. 3
Advertisement
