Confi Guring The Display; Cd Mode; Switching To Cd Mode - Blaupunkt Bahamas MP46 Operating And Installation Instructions

Radio mode
When you have fi nished making your
changes,
u Press the MENU button 9 three
times.
Note:
The defi ned scanning time is also
applied by the system to scanning
carried out in CD and CD changer
mode.
Confi guring the display
In radio mode, you can display the time on
the display in an enlarged format.
u
Press and hold DISPL
longer than 2 seconds to switch the
display mode.
After 2 seconds the display automatically
switches back to the previous display.
14

CD mode

You can use this device to play standard
Audio-CDs, CD-Rs and CD-RWs with a
diameter of 12 cm. To avoid problems
when playing self-burned CDs, you should
not burn CDs at speeds greater than 16-
speed.
CD singles with a diameter of 8 cm and
noncircular contoured CDs (shape CDs)
must not be used.
We accept no responsibility for any da-
button 8
mage to the CD drive that may occur as a
result of the use of unsuitable CDs.
To ensure proper functioning, use only CDs
with the Compact-Disc logo. Copy-pro-
tected CDs can cause playback problems.
Blaupunkt cannot guarantee the proper
functioning of copy-protected CDs!
Besides being able to play audio CDs on
this device, you can also play CDs contai-
ning MP3/WMA music fi les. For further in-
formation, please read the chapter entitled
"MP3/ WMA mode".

Switching to CD mode

If there is no CD inserted in the drive,
u
Press the
The control panel opens.
u
Gently insert the CD with its printed
side uppermost into the drive until you
feel some resistance.
Risk of severe damage
to the CD drive!
button 2.
CD mode