TEFAL ActiFry express XL AH950 User Manual page 9

Problems
The chips are not
crunchy enough.
The chips break
during cooking.
The food stays on
the edge of the
pan.
Cooking fluids have
leaked into the
base of the
appliance.
The LCD screen
does not work.
The LCD displays
shows «Er» (error).
The appliance
is abnormally noisy.
If you have any product problems or queries call our Customer Relations Team first for
expert help and advice:
Helpline: 0845 602 1454 - UK (01) 677 4003 - ROI
or contact us via our web site: www.tefal.co.uk
Causes
You are not using a potato
variety that is recommended
for chips.
The potatoes are insuffciently
washed and/or not completely
dried.
The chips are too thick.
There is not enough oil.
The filter is clogged.
The quantity is too large.
The pan has too much food.
Max level exceeded.
Faulty pan or paddle.
The max level has been
exceeded.
The appliance is not plugged in.
The lid is open.
The appliance is not
functioning correctly.
You suspect there is a problem
in the way the appliance
motor is working.
Solutions
Choose a potato variety that is
recommended for chips such as Maris Piper
or King Edwards.
Wash potatoes for a long time to remove the
starch, drain and dry very thoroughly before
cooking. They must be completely dry.
Cut them more thinly. The maximum chip
dimensions are 13 mm x 13 mm.
Increase the amount of oil
table p. 13 to 14).
Clean the filter.
Reduce the amount of potatoes and adjust
the cooking time.
Comply with the maximum quantities shown
on the cooking table.
Put the turn-over ring in place.
Reduce the amount of food.
Reduce the quantities.
Check that the paddle is correctly positioned,
otherwise call the customer Helpline below.
Observe the max level.
Do not use ActiFry for making recipes with a
high liquid content.
Plug the appliance in.
Close the lid.
Unplug the appliance, wait for 10 seconds,
plug the appliance in again and press
button. If the LCD screen still shows Er, see
the table of error codes p.17.
Call the customer Helpline below.
9
(see cooking
EN