New Balance 1600 Owner's Manual page 9

STEP 3 – Side Cap Assembly
a) Attach Side Cap with (3) M4 x 6mm Phillips
Screws at the bottom of the Upright.
Repeat on other side.
b) Use the Multi Hex Tool with Phillips
Screwdriver provided to tighten.
8
Figure 3 - Install Side Caps
Assembly is now complete.
IMPORTANT:
Follow the "Setting Up Treadmill For Use"
instructions on the next two pages to move
the Treadmill off the shipping carton so you
may begin your workout.
upright
side cap
M4 x 6mm
phillips screws