Assembly/Setup Instructions - New Balance 1600 Owner's Manual

WARNING
DO NOT MOVE TREADMILL OUT OF
THE BOX UNTIL UNIT IS ASSEMBLED.
COLLAPSE BOX BOTTOM AND LAY
SIDES DOWN BEFORE ASSEMBLY.
WHEN MOVING ASSEMBLED
TREADMILL OUT OF THE BOX, MOVE
IT OUT OF THE BOX ON ITS WHEELS
WHILE THE DECK IS IN THE FOLDED
AND LOCKED POSITION.
FAILURE TO FOLLOW THIS
PROCEDURE MAY RESULT IN
SERIOUS INJURY.
Parts Box
Tools Required: (included)
Allen Wrench
Multi Hex Tool with
Phillips Screwdriver
power cord
side cap (2)
6

ASSEMBLY/SETUP INSTRUCTIONS

For Maximum Effectiveness and Safety,
NOTE: All location references, such as front, rear,
left or right, made in these instructions are from the
user position – on the Treadmill facing the Console.
Fastener Pack
M8 x 20mm allen bolt (6)
M8 curved washer (4)
M4 x 6mm phillips screw (6)
Please Read This Owner's Manual
Before Assembling or Using Your
New Balance 1600/1800 Treadmill.
M8 washer (2)
allen wrench
multi hex tool
with phillips
screwdriver
safety key