Advertisement
Quick Links
Advertisement
Related Manuals for Hitachi S 14DSL
Summary of Contents for Hitachi S 14DSL
- Page 1 G 14DSL・G 18DSL・G 18DSL(S) G14DSL Handling instructions...
- Page 2 c) Prevent unintentional starting. Ensure the GENERAL POWER TOOL SAFETY switch is in the off position before connecting to WARNINGS power source and/or battery pack, picking up or carrying the tool. WARNING Carrying power tools with your fi nger on the switch Read all safety warnings and all instructions.
-
Page 3: Kickback And Related Warnings
b) Use power tools only with specifi cally g) Do not use a damaged accessory. Before each use designated battery packs. inspect the accessory such as abrasive wheels for Use of any other battery packs may create a risk of chips and cracks, backing pad for cracks, tear or injury and fi... - Page 4 toward or away from the operator, depending on direction of ADDITIONAL SAFETY WARNINGS the wheel’s movement at the point of pinching. SPECIFIC FOR ABRASIVE CUTTING- Abrasive wheels may also break under these conditions. Kickback is the result of power tool misuse and/or incorrect OFF OPERATIONS operating procedures or conditions and can be avoided by taking proper precautions as given below.
- Page 5 13. If a guard is equipped with the tool never use the tool 35. Do not dispose of the battery in fi re. If the battery is burnt, without such a guard. it may explode. 14. Do not use separate reducing bushings or adapters to 36.
-
Page 6: Standard Accessories
2. If liquid leaks onto your skin or clothes, wash well with ○ When the product is not being used, cover the USB port clean water such as tap water immediately. with the rubber cover. There is a possibility that this can cause skin irritation. Buildup of dust etc. -
Page 7: Specifications
(At 1-second intervals). (See Table NOTE 1-a) Due to HITACHI’s continuing program of research and ● Pilot lamp indication development, the specifi cations herein are subject to The indications of the pilot lamp will be as shown in change without prior notice. - Page 8 Table 1-b Indications of the charge indicator lamp Lights for 0.5 seconds. Does not light for Before Blinks 0.5 seconds. (off for 0.5 seconds) Plugged into power source charging (red) Lights for 0.5 seconds. Does not light for Blinks 1 second. (off for 1 second) Battery capacity at less than 50% (blue) While...
-
Page 9: Maintenance And Inspection
When replacing the carbon brush with a new one, be charger is taken out, wait for a minimum of 3 seconds sure to use the Hitachi Carbon Brush Code No. 999054. before reinserting it to continue charging. If the battery 5. - Page 10 G14DSL G18DSL G18DSL(S) 14.4 V 18 V 18 V 9300 /min 9100 /min 9100 /min 115 mm 115 mm 125 mm 22.23 mm 22.23 mm 22.23 mm 6 mm 6 mm 6 mm 80 m/s 80 m/s 80 m/s 1.7 kg 1.8 kg 2.0 kg G14DSL...
- Page 11 <UC18YFSL> <UC18YSL3>...
- Page 12 15° – 30°...
- Page 13 ⓐ ⓑ 3 mm 11.5 mm ⓒ...
- Page 15 937817Z D = 115 mm : 316821 D = 125 mm : 316822 318312 938332Z 994324 999054 329897 G14DSL / G18DSL : 332785 G14DSL / G18DSL : 315492 G18DSL(S) : 331766 18 V (Li-ion) 14.4 V (Li-ion) UC18YFSL (14.4 V – 18 V) UC18YSL3 (14.4V –...
- Page 16 Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan Code No. C99708712 G Printed in China...