Use Your Product; Switch Your Tv On/Off Or To Standby; Switch Channels; Watch Connected Devices - Philips 5000 Series User Manual

4 Use your
product
This section helps you perform basic operations
(see 'Use more of your product' on page 9 ) .
Switch your TV on/off or to
standby
To switch on
• If the standby indicator is off, press
POWER at the side of the TV.
• If the standby indicator is red, press
( Standby-On ) on the remote control.
To switch to standby
• Press ( Standby-On ) on the remote
control.
»
The standby indicator switches to red.
To switch off
• Press POWER at the side of the TV.
»
The standby indicator switches off.
Tip
•
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.

Switch channels

• Press BACK A/CH on the remote
control to return to the previously
viewed channel.
• Press CH +/- on the remote control or
P/CH +/- on the side of the TV.
• Press OK to use the channel matrix.
• Enter a channel number using the
Numeric buttons .
Note
•
When you use a favorite list, you can only
select those channels in the .

Watch connected devices

Use the source button
1
Press SOURCE .
»
The source list appears.
2
Press or to select the connected
device.
3
Press OK to watch the connected device.
EN 7