Adjust Sound Settings - Philips 5000 Series User Manual

Change picture format
1
Press FORMAT .
»
A picture format bar appears.
2
Press to select a picture format.
»
The selected picture format is
activated.
3
Press OK to conÀ rm your choice.
Summary of picture formats
The following picture settings can be
conÀ gured.
Note
•
Depending on the format of the picture
source, some picture settings are not available.
[Auto format] (Not for
PC mode.) Enlarges the
picture automatically to
best À t the screen. The
subtitles remain visible.
[Super zoom] (Not
for HD and PC mode.)
Removes the black bars on
the side of 4:3 broadcasts.
There is minimal
distortion.
[Movie expand 16:9] (Not
for HD and PC mode.)
Scales 4:3 format to 16:9.
[Wide screen] Stretches
the classic 4:3 format to
16:9.

Adjust sound settings

1
Press ( Home ).
2
Press to select [Setup] > [Sound] .
3
Press to select and adjust:
• [Bass] : Adjusts the bass level.
• [Treble] : Adjusts the treble level.
• [Volume] : Adjusts the volume.
• [Audio language] : (Digital channels
only). Selects between audio
languages when multiple languages
are broadcast.
• [Alternate audio] : Selects alternate
audio.
• [Mono/Stereo] : Selects between
mono or stereo if stereo is
broadcast.
• [TV speakers] : Turns on or off TV
speakers. If [Automatic (EasyLink)]
is selected, the TV speakers are
switched off when content from an
EasyLink-compliant home theater
system is detected.
• [Surround] : Enables spatial sound.
• [Headphones volume] : Adjusts
headphone volume.
• [Delta volume] : Corrects volume
differences between TV channels
and connected devices (switch
to your connected device when
adjusting [Delta volume] ).
• [Balance] : Adjusts the balance of the
right and left speakers to best suit
your listening position.
• [Auto volume leveling] :
Automatically reduces sudden
volume changes, for example, when
switching channels. When enabled,
this produces a more consistent
audio volume.
EN 11